•1 x Hammersmith PowerGrip ratchet •1 x Hammersmith PowerGrip adapter •1 x Hammersmith PowerGrip 7 - 19 mm universal socket head
Gross: 451g / Net: 408g
Instructions: Manual use: Plug the PowerGrip universal socket directly onto the ratchet until it clicks into place. Then place the PowerGrip universal socket on the screw/hook/nut and turn the ratchet clockwise or anti-clockwise to tighten or loosen the screw. To change the direction of rotation, change to the desired direction on the rotation direction switch. For disassembly, pull apart the individual parts by tugging with a small amount of force. Use with a drill: Slide the PowerGrip adapter into the drill or cordless screwdriver chuck. Then plug the PowerGrip universal socket onto the adapter. Make sure that the universal socket and adapter are locked in place. Now place the PowerGrip universal socket on the screw/hook/nut, and carefully tighten or loosen it using the drill or cordless screwdriver. To change the direction of rotation, change to the desired direction on the drill.
Make sure that no liquids (e.g. water, greases, etc.) enter the Hammersmith PowerGrip, as this could impair the functionality. Never attempt to oil the Hammersmith PowerGrip. Always read and follow the owner's manual for your power tool and the instructions for use of the accessory. Always wear safety goggles to protect your eyes. Always inspect the bit and the extension prior to use, and do not use them if damage is suspected. Do not use the bit extension in pneumatic or impact power drills. High torque loads from these drills may cause the extension to break, which could cause bodily injury. Only use the grooved hex shank accessory that comes with your Hammersmith PowerGrip. Non-grooved hex shank accessories will not lock into the extension, and could unexpectedly release while drilling, which may result in bodily injury.